Processor Configuration - Kodak Ektascan 2180 User Manual

User's Manual

Processor Configuration

Automatic Replenishment Mode
Select this mode when you want the Processor to automatically adjust the replenishment
volumes for developer and fixer according to the film usage for the Processor. See
"Replenishment Mode" in this section.
Flooded Replenishment Mode
Select this mode when the film usage for the Processor is only 1 or 2 sheets of film
⁄
1
during a hour period. Chemicals will be replenished automatically:
2
• every 5 minutes, achieving a minimum replenishment of 780 mL/hour during
Processor operation.
• when the equivalent film area of 35 x 43 cm has been processed.
Note
Contact your Service Representative for other Flooded Mode requirements.
Tank Fill Mode
Select this mode to fill the Processor tanks automatically. In this mode the Processor
tanks fill with solution from the Replenishment Tanks until the level sensors detect that
the Processor Tanks are full.
Disable Replenishment
Select this feature to disable the Replenisher Pumps before doing any of the cleaning
procedures.
13–2 5B9615