Configuration; Autoprint - Kodak Ektascan 2180 User Manual

User's Manual

Configuration

To enter the Configuration Options Menu, there can be no images stored on the current
page. The Configuration Options Menu allows you to access and change the following:

• Autoprint

• Audio Option
• Rotation Option
• Study Option
To enter the Configuration Options Menu, press:
[Program]
[F4]
The system will display the following menu.
F1 AUTOPRINT
F3 STUDY OPTION
Autoprint
The autoprint option allows you to specify that a page should be sent to the print queue
automatically when the page format has been filled with images. When autoprint is not
enabled, press [Print] on the Keypad to send each page to the print queue. The default
setting for autoprint is ON.
To change the autoprint status, press:
[Program]
[F4]
[F1]
The current setting will be displayed.
To change the autoprint setting, press:
[F1]
[E]
Note
The [Print] key can be used at any time, even if autoprint is ON. This means that you
can print partial pages, even if the page is not filled.
4–24
F2 AUDIO OPTION
F4 ROTATION OPTION
5B9615