Changing The Modality Id - Kodak DryView 8150 User Manual

Adding a Modality

Changing the Modality ID

4-10
c. Go to Section 5 of this manual to adjust the parameters shown on
the Image Quality screen.
d. After completing the procedure in Section 5, continue with
"Changing the Modality
The Modality ID sent down from the modality is a combination of modality
type and IP Address. If you wish, you can change this "name" to a more
user- friendly name for use on the Local Panel Screens as follows:
1. With Modality ID highlighted, touch Select. A keypad appears on the
Local Panel.
2. Use the keypad to enter a new name for the modality.
3. Touch OK to return to the Modality defaults screen.
7F3319
ID".
October 4, 2004