Process Information For The 180 Lp Or 180 Lps Processor - Kodak Ektascan 2180 User Manual

User's Manual

Process Information for the 180 LP or 180 LPS Processor

Process Time, Throughput films/
seconds Drop Time seconds Film/Chemical hr.
63 79 HN/HNC film, 180
RP chemicals
Process Time is the time that it takes the leading edge of a sheet of film to travel from
the Entrance Detector Rollers to the Exit Rollers of the Dryer Rack.
Drop Time is the time it takes the leading edge of a 35 x 43 cm (14 x 17 inch) sheet of
film to enter the Entrance Detector Rollers and the trailing edge to exit the Dryer Rack
when the 35 cm side is fed first.
Film/Chemical is the combination of film type and chemicals that is required for
optimum image quality when using the Processor. Kodak RP X-Omat Developer
Replenishment and Kodak X-Omat Fixer Replenishment, or equivalents, may be used.
Contact your Kodak Representative to discuss the best option for your needs.
Throughput is the number of 35 x 43 cm sheets of film that can be processed in one hour.
11–6 5B9615