Items Needed For Processor Quality Assurance - Kodak Ektascan 2180 User Manual

User's Manual

Items Needed for Processor Quality Assurance

The following items are needed for processor quality assurance:
• Kodak Process Control Densitometer, or alternative densitometer
• Thermometer (not mercury)
• Control charts for recording process control data or Kodak Process Control
Densitometer with an appropriate printer
• Fresh box of Kodak Ektascan HN Laser Film
The laser film that is routinely used in the Printer can be used, but the emulsion
number must be tracked. The emulsion number is identified on the box of film as
indicated below.
EHFL EHFL
EHFL EHFL
-10- -10-
-10- -10-
100 SHT.
X
cm
555 666 77 CC
10/1994
CAT
828 1578
456777 R012
16–6
Kodak Diagnostic Film
Ektascan Ektascan
Ektascan Ektascan TM
FAST LOAD PACKAGE
100 100
100 100
35 X 43 cm
555 666 77 CC 555 666 77 CC
555 666 77 CC 555 666 77 CC
Emul No.
10/1994 10/1994
10/1994 10/1994
Exp.
CAT 828 1578 CAT 828 1578
CAT 828 1578 CAT 828 1578
emulsion number
HNFL HNFL
HNFL HNFL
EHFL-10 EHFL-10
EHFL-10 EHFL-10
H126_2718GCA
H126_2718GC
5B9615