Using The Access Code - Kodak Ektascan 2180 User Manual

User's Manual

Using the Access Code

Only the Service Representative and the Key Operator should use the access code.
The access code 4213 is necessary to change setup information that is preset at the
factory (like default settings). The access code is not necessary to change the Dryer
temperature. The access code must be entered at the Processor Setup Access Screen. Use
the Control Processor Screen to enter the Processor Setup Access Screen.
F1
Press [F3] to display the Processor Setup Access Screen. This selection only appears as
an option on the screen when there is no film in the Processor.
11–8
CONTROL PROCESSOR
Processor Ready
temp=100.0F
Dev:
temp=100.0F
Fix:
Dry: temp=119.5F
F1 Increase Dry Set
F2 Decrease Dry Set
F3 Setup Processor
F6
Return
Select the desired function.
F2 F3 F4
Set=100.0F
Set=100.0F
Set=120.0F
F5 F6
H126_9049AC
5B9615