Admin Setup - Oki PRO330S User Manual

Item
BG SETTING
DRUM CLEANING
HIGH HUM. MODE
NARROW PAPER SPEED

ADMIN SETUP

This section explains the settings by the machine administrator. The password is required to
enter this menu.
Item
PASSWORD
NETWORK ENABLING DEFAULT
SETUP GATEWAY
WIRED
TCP/IP
NETBIOS OVER TCP
IP ADDRESS SET
IPV4 ADDRESS
SUBNET MASK
GATEWAY ADDRESS
DHCPV6
WEB
TELNET
FTP
IPSEC
SNMP
Setting value
0
+1
+2
+3
-3
-2
-1
ON
OFF
OFF
ON
NORMAL
MODE1
Setting value
******
WIRED
WIRELESS
(INFRASTRUCTURE)
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
AUTO
MANUAL
xxx.xxx.xxx.xxx
◆ When the cable is
attached
169.254.XXX.XXX
◆ When the cable is not
attached
192.168.100.100
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
- 75 -
The shaded settings are the factory default settings.
Corrects printing variations due to
differences in temperature and humidity,
and printing density/printing frequency.
Change the value if the underlay is dark.
Set it to ON when you want to reduce
the white streaks seen on the printing
result. When it is turned on, the service
life of the image drum will be shortened.
Set it to ON when the paper printed
begins to curl significantly.
Sets the speed of printing on narrow
paper.
NORMAL: The print speed is not changed
when narrow paper is used to print.
* Once the temperature control is in
effect, the printing speed will reduce
until printing has stopped.
MODE1: The print speed is lowered
when narrow paper is used to print.
The shaded settings are the factory default settings.
Description
Input the password required to enter the ADMIN SETUP menu.
The factory default password is "999999".
Set to enable the default gateway for wired LAN or
wireless LAN interface.
This item is only displayed when the setting of [BOOT
MENU] - [WIRELESS MODULE] is set to [ENABLE].
Enables/Disables the wired LAN.
Enables/Disables the TCP/IP protocol.
Enables/Disables the NETBEUI protocol.
Sets the IP address setup methods.
Sets the IP address.
Sets the subnet mask.
Sets the gateway (default router) address.
0.0.0.0 means there is no router.
Enables/disables DHCPv6.
Enables/Disables the WEB.
Enables/Disables the TELNET.
Enables/Disables the FTP.
Disables IPSec.
Enables/Disables the SNMP.
Description