Printing stops in between
Possible causes
The temperature is adjusted
because the temperature
inside this machine has risen
due to long-time continuous
printing.
Temperature adjustment of
the fuser unit is in progress.
The memory is insufficient
Possible causes
The print data is complicated. Simplify the print data.
Printing is slow
Possible causes
Printing is also performed
from the PC side.
On the [Setup] tab of the
printer driver, [Quality] or
[Fine/Detail(1200x1200)] is
selected.
The print data is complicated. Simplify the print data.
The power turns off automatically
Possible causes
If this machine has not been
used for a certain period of
time (whose factory default
setting is 4 hours), the power
will turn off automatically
(AUTO PW OFF).
Solution
Please wait for a while.
The printing will automatically
start again once the
temperature of this machine
returns appropriate.
Please wait for a while.
Solution
Solution
Use a PC with a fast processing
speed.
On the [Setup] tab of the
printer driver, select [Normal
(600x600dpi)] or [Draft (600 x
600 dpi)] in [Quality].
Solution
To prevent the power from
turning off, set [DISABLE] in
[ADMIN SETUP] - [POWER
SETUP] - [AUTO PW OFF] on the
operator panel.
- 210 -
Reference
-
-
Reference
-
Reference
-
-
-
Reference
Setting the time that
elapses before the power
is turned off automatically
(AUTO PW OFF)