Oki PRO330S User Manual page 82

Item
YELLOW MID-
TONE
YELLOW DARK
COLOR DENSITY CYAN DENSITY
MAGENTA
DENSITY
YELLOW DENSITY 0
ADJUST REGISTRATION
Setting value
0 Adjusts the mid-tone of the special gradate yellow.
+1 You can darken the density by adjusting it in the plus
+2 direction, or lighten the density by adjusting it in the minus
+3 direction.
-3
-2
-1
0 Adjusts the dark tone (dark area) of the special gradate
+1 yellow.
+2 You can darken the density by adjusting it in the plus
+3 direction, or lighten the density by adjusting it in the minus
-3 direction.
-2
-1
0 Adjusts the density of the cyan color.
+1 You can darken the density by adjusting it in the plus
+2 direction, or lighten the density by adjusting it in the minus
+3 direction.
-3 This setting will be enabled on any printing after the density
-2 adjustment is executed.
-1
0 Adjusts the density of the magenta color.
+1 You can darken the density by adjusting it in the plus
+2 direction, or lighten the density by adjusting it in the minus
+3 direction.
-3 This setting will be enabled on any printing after the density
-2 adjustment is executed.
-1
Adjusts the density of the yellow color.
+1 You can darken the density by adjusting it in the plus
+2 direction, or lighten the density by adjusting it in the minus
+3 direction.
-3 This setting will be enabled on any printing after the density
-2 adjustment is executed.
-1
EXECUTE When this menu is selected, the machine will automatically
execute the registration adjustment. Please execute it when
the machine is in the standby mode.
- 82 -
The shaded settings are the factory default settings.
Description