Oki PRO330S User Manual page 141

4
Select the item you want to set in each tab, and click [OK].
5
Click [Print].
6
Since the printed paper stops near the presenter unit, check the operator
panel and pull out the paper.
7
Repeat Step 6 until all the pages have been printed.
8
Pull out the last page which stops near the presenter unit.
• Setting it to Mode 2
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Select the item you want to set in each tab, and click [OK].
5
Click [Print].
6
Pull out the last page which stops near the presenter unit.
• While the printed paper is held, the machine will not enter the power save mode.
• If the printed paper is not completely ejected, check on the operator panel that the settings of [PRESENTER
MODE] and [PRESENTER UNIT] match the operating environment.
- 141 -