5
Select [Enable] in [Wireless(Infrastructure)] of [Setup].
• The factory default setting is "Disable".
6
Input the SSID name of the desired wireless AP in [SSID].
7
Select [WPA/WPA2-EAP] in [Security] of [Security Settings].
8
After all the basic settings and security settings are configured, click the
[Submit] button on the lower left corner of the web screen to apply the
settings. It may take about one minute to connect to the wireless AP. If
the connection fails, reset the wireless settings from the operator panel, or
switch to wired LAN from the operator panel and reset the wireless settings
from the web page.
- 249 -