Oki PRO330S User Manual page 71

WIRELESS
(INFRASTRUCTURE)
INFO
WIRELESS
(AP MODE)
INFO
SYSTEM SERIAL NUMBER
ASSET NUMBER
LOT NUMBER
FW VERSION
CU VERSION
PU VERSION
RAM
FLASH MEMORY
Item
FW VERSION
WIRELESS
(INFRASTRUCTURE)
SSID
SECURITY
*1: Only web
settings are possible
STATE
BAND
CHANNEL
RSSI
IPV4 ADDRESS
SUBNET MASK
GATEWAY ADDRESS xxx.xxx.xxx.xxx
MAC ADDRESS
IPV6 LOCAL
IPv6 STATELESS
IPv6 STATEFUL
WIRELESS(AP
MODE)
SSID
PASSWORD
CONNECTED
DEVICES
IPV4 ADDRESS
Setting value
ENABLE
DISABLE
DISABLE
WEP
WPA/WPA2-PSK
WPA2-PSK
WPA/WPA2-EAP *1
WPA2-EAP *1
STARTED
SCANNING
CONNECTED
DISABLE
2.4 GHz (B)
2.4 GHz (B+G)
2.4 GHz (B+G+N)
2.4 GHz (G)
2.4 GHz (N)
2.4 GHz (B/G/N)
2.4 GHz
5.0 GHz (A+N)
5.0 GHz (A)
5.0 GHz (N)
5.0 GHz (A/N)
5.0 GHz
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xx:xx:xx:xx:xx:xx
xxxx:xxxx:xxxx:xxxx:x
xxx:xxxx:xxxx:xxxx
xxxx:xxxx:xxxx:xxxx:x
xxx:xxxx:xxxx:xxxx
xxxx:xxxx:xxxx:xxxx:x
xxx:xxxx:xxxx:xxxx
ENABLE
DISABLE
xxx.xxx.xxx.xxx
xxxxxxxxxxxxxxxxxx
xxxxxxxx
xxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxx
xxxxxxxx
xxx.xx_x_x
xx.xx
xx.xx.xx
xxMB
xxMB [Fxx]
- 71 -
Description
Displays the firmware version of
the wireless LAN.
Displays the state (enabled or
disabled) of the wireless network
(infrastructure).
Displays the SSID of the
connection destination.
Displays the security of the
wireless LAN function.
Displays the wireless LAN
connection state.
Displays the band in use.
Displays the channel number in
use.
Displays the strength of the
received signal in percentage.
Displays the IPv4 address.
Displays the subnet mask.
Displays the gateway address.
Displays the MAC address.
Displays the IPv6 address.
Displays the IPv6 address
(stateless).
Displays the IPv6 address
(stateful).
Displays the state (enabled or
disabled) of the wireless network
(AP mode).
Displays the SSID of the
connection destination.
Displays the password.
Displays the number of
connected devices.
Displays the IPv4 address.
Displays the serial number of the
machine.
Displays the asset number of the
machine.
Displays the lot number of the
machine.
Displays the firmware version.
Displays the firmware version of
the Control Unit (CU).
Displays the firmware version of
the Print Unit (PU).
Displays the capacity of the RMM
installed in the machine.
Displays the capacity of the flash
memory installed in this machine.