Using Ieee802.1X (Wired Lan) - Oki PRO330S User Manual

Using IEEE802.1X (Wired LAN)

This machine is compatible with IEEE802.1X authentication. IEEE802.1X authentication is
possible after IEEE802.1X authentication on the web page of this machine is enabled and the
authentication switch is connected.
• Setting with EAP-TLS
This section describes how to set up EAP-TLS, one of the IEEE802.1X authentication.
1
Open the web page of this machine.
• For details on how to open it, refer to
2
Log in as an administrator.
3
Select [Admin Setup].
4
Select [Network] - [IEEE802.1X].
5
Select [Enable] in [IEEE802.1X].
6
Select [EAP-TLS] in [EAP Type].
7
Input the user name in [EAP User].
8
Select [Not use SSL/TLS Certificate for EAP authentication], and click
[Import].
9
Input the file name of the certificate.
Only PKCS#12 files can be imported.
10
Input the certificate password, and click [OK].
11
Select [Authenticate Server], and click [Import].
12
Input the file name of the CA certificate, and click [OK].
Specify the CA certificate used for RADIUS server authentication. PEM, DER and KCS#7
files can be imported.
13
Click [Submit].
The new settings will take effect after the network function of the machine has been reset.
14
When the machine is ready to print, power off the machine.
• Refer to "Turning the power off" (Page 35)
15
Remove the LAN cable from the machine.
16
Proceed to "Connecting this machine to the authentication switch" (Page
246).
"Opening the web page" (Page
for details on how to turn the power off.
- 245 -
225).