Admin Setup - Oki ES6405 User Manual

Admin Setup

ITEM
Enter
Password
Network TCP/IP
Setup
IP Version
NetBEUI
NetBIOS
over TCP
SETTINGS
xxxxxxxxxxxx
Enable
Disable
IP v4
IP v4+v6
IP v6
Enable
Disable
Enable
Disable
33
– ES6405 User's Guide
EXPLANATION
Enter a password to gain entry to
the Admin Setup menu.
Password should be from 6 to 12
digits of alpha/numeric
characters (or mix)
The default value is "aaaaaa"
Sets TCP/IP Protocol.
Enable: TCP/IP Protocol is
available.
Disable: TCP/IP Protocol is not
available.
Sets up the IP version.
Operates with IPv4 for IPv4 (not
valid with IPv6).
Operates with both IPv4 and
IPv6 for IPv4+v6.
Operates with IPv6 for IPv6 (not
valid with IPv4).
There is only IPv4 and IPv4+v6
as normal value.
From this stage, if IPv6 only is
set from UI, for example Telnet,
"IPv6" appears as the value of IP
Version on the operation panel.
"IPv6" will disappear from the
value if "IP v4" or "IP v4+v6" is
selected.
Display Condition:
TCP/IP should be enabled.
Sets Enable/Disable of NETBEUI
Protocol.
Sets Enable/Disable of NetBIOS
over TCP protocol.
Display Conditions:
• TCP/IP should be enabled.
• IP Version is not IPv6.