Table of Contents
Advertisement
8
Fans
8.1
Safety notes
CAUTION
▶
Do not damage or modify internal cables or devices. Doing so may
cause a device failure, fire, or electric shock.
▶
Devices and components inside the server remain hot after
shutdown. After shutting down the server, wait for hot components
to cool down before installing or removing internal options.
▶
Circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Always discharge static
build-up (e.g. by touching a grounded object) before handling
electrostatic-sensitive devices (ESDs).
▶
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
▶
If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.
▶
The procedure of installation on this notes might change depending
on a configuration of options.
▶
For more information, see
8.2
Basic information
The PRIMERGY CX400 M6 server enclosure features five hot-plug fan
modules.
Fan positions
The
Figure 110
shows the position of the system fans 1 to 5.
CX400 M6
"Important information" on page
Upgrade and Maintenance Manual
25.
145
Advertisement
Table of Contents
