Hard disk drive (HDD) / solid state disk (SSD)
▶ Remove all HDD/SSD modules from the relevant HDD/SSD cage, see
"Removing a 2.5-inch HDD/SSD module" on page
▶ If applicable, remove all 2.5-inch HDD/SSD dummy module, see
a 2.5-inch HDD/SSD dummy module" on page
▶
"Extending the server enclosure out of the rack" on page
▶
"Removing the top covers" on page
▶
"Removing the defective high speed riser module" on page
▶ Remove all fan modules, see
▶
"Removing the fan cage" on page
▶ Remove all HDD backplanes, see
on page
122.
▶
"Removing the power distribution board kit" on page
Removing the HDD/SSD bridge board
Figure 99: Installing the HDD/SSD bridge board
136
54.
"Removing the fan module" on page
120.
"Removing the 2.5-inch HDD backplane"
Upgrade and Maintenance Manual
116.
113.
49.
151.
157.
"Removing
147.
CX400 M6