Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual page 142

Hard disk drive (HDD) / solid state disk (SSD)
Installing the HDD/SSD x6 front bezel
Figure 106: Installing the front bezel (A)
▶ Hook the front bezel onto the bottom of the empty cage and rotate it as
shown by the arrows to snap it into the cage.
Figure 107: Installing the front bezel (B)
▶ Secure the corresponding front bezel with one screw from top of the chassis
(see circle).
Installing the HDD/SSD x4 front bezel
▶ If applicable, remove the HDD/SSD modules beside the front bezel (see
"Removing 2.5-inch HDD/SSD modules" on page
142 Upgrade and Maintenance Manual
115).
CX400 M6