Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual page 52

Basic hardware procedures
When not using a cable management arm
Figure 12: Removing the server enclosure from the rack (A)
▶ Pull the server enclosure out of the rack as far as it will go (1).
▶ Release the locking springs on both rack rails (2).
When using a cable management arm
Figure 13: Removing the server enclosure from the rack (A)
▶ Pull the server enclosure out of the rack as far as it will go (1).
52 Upgrade and Maintenance Manual CX400 M6