Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual page 69

When using a CMA
Figure 35: Mounting the server enclosure into the rack (B)
▶ Push the server enclosure into the rack.
▶ When the server enclosure stops, push the locking latch (1) on both sides
and push the server enclosure into the rack (2).
▶ When the server enclosure does stop again, push the shift brackets (3) on
both sides and push the server enclosure into the rack (4).
CX400 M6 Upgrade and Maintenance Manual
Basic hardware procedures
69