Table of Contents
Advertisement
Basic hardware procedures
▶ Snap the right rack rail support holes into the chassis T-shaped pins (1) and
slide forward (2).
Figure 27: Adjusting the rack rail
▶ Fasten the rack rail with two M4 screws (see circles).
▶ Repeat this procedure to install the left rack rail.
Installing the rack rails
▶ Clarify the position of the system unit in the rack.
▶ Mark the position of the bottom edge of the server enclosure on the support
uprights.
▶ Identify the right and the left rail.
62
Upgrade and Maintenance Manual
CX400 M6
Advertisement
Table of Contents
