Table of Contents
Advertisement
Important information
▶ Any failure to observe the guidelines in this manual, and any improper
repairs could expose the user to risks (electric shock, energy hazards, fire
hazards) or damage the equipment.
▶ Only valid for non hot-plug components
Before installing/removing internal components to/from the server enclosure,
turn off the server enclosure, all peripheral devices, and any other
connected devices. Also unplug all power cords from the power outlet.
Failure to do so can cause electric shock or damage.
3.2.2
Before starting up
▶ During installation and before operating the server enclosure, observe the
instructions on environmental conditions for your server enclosure.
▶ If the server enclosure is brought in from a cold environment, condensation
may form both inside and on the outside of the server enclosure.
Wait until the server enclosure has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused to the
server enclosure if this requirement is not observed.
▶ Only transport the server enclosure in its original packaging or in packaging
that protects it from impacts and jolts.
In Japan and APAC, transporting the server enclosure in its original
packaging does not apply.
3.2.3
Installation and operation
▶ This server enclosure should not be operated in ambient temperatures
above 35 °C. For server enclosures with Advanced Thermal Design the
ambient temperature can increase to 40 °C or 45 °C.
▶ If the server enclosure is integrated into an installation that draws power
from an industrial power supply network with an IEC309 connector, the
power supply's fuse protection must comply with the requirements for non-
industrial power supply networks for type A connectors.
▶ The server enclosure automatically adjusts itself to a mains voltage, see the
type label of your server enclosure. Ensure that the local mains voltage lies
within these limits.
26
Upgrade and Maintenance Manual
CX400 M6
Advertisement
Table of Contents
