Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual page 148

Fans
Installing the fan module
Figure 112: Installing the fan module
▶ Carefully insert the fan module into the bay and press down firmly until it is
fully seated in the bay.
Concluding steps
▶
"Installing the fan cover" on page
▶
"Sliding the server enclosure into the rack" on page
▶ If applicable, install the front bezel, see
page 47.
▶
"Performing a fan test" on page
148
58.
"Installing the front bezel" on
94.
Upgrade and Maintenance Manual
68.
CX400 M6