Table of Contents
Advertisement
System Features
®
®
Inter-Tel
Axxess
Administrator Guide — Issue 11.0, May 2008
INTER-TEL ENDPOINT FEATURES
The following sections describe how to use Inter-Tel endpoint features.
VOLUME CONTROLS
On Inter-Tel endpoints, volume is controlled in the following ways:
•
•
•
•
•
NOTE:
through displays. The analog endpoint volume buttons are used only for adjusting volume; they
need to have PREVIOUS and NEXT buttons programmed in their keymaps to scroll through dis-
plays.
To change volumes on an Inter-Tel endpoint:
1.
Page 172
On Models 8500, 8520, and 8560 endpoints, illustrations of speakers (
resent higher and lower volume levels. Press the
ume and the
end of the button to raise the volume.
On the Executive, Standard, and Axxess Basic endpoints, an illustration on the button
(that looks like this
lower end in place of the down arrow and the higher end in place of the up arrow.
On the Professional, Associate, and Eclipse Basic endpoints, arrows on the key repre-
sents higher and lower volume levels.
On some analog endpoints, speaker volume and ring tone volume are controlled by two
thumbwheels on the right-hand side of the endpoint.
The other Inter-Tel endpoints have separate VOL UP and VOL DOWN keys.
The volume adjustment button on the digital endpoints also can be used for scrolling
Press the appropriate button to raise or lower the volume, using one of the procedures
listed below. A confirmation tone will alert you when you have reached the highest or
lowest possible volume. On display endpoints, the display shows VOLUME LEVEL X.
The "X" represents the level and changes as the volume is raised or lowered.
•
To change handset intercom voice volume: Adjust the volume while on an off-
hook (handset) intercom call.
•
To change handsfree intercom voice and paging volume: Adjust the volume
while on an on-hook (speakerphone) intercom call.
•
To change handset outside call voice volume: Adjust the volume while on an
off-hook (handset) outside call.
•
To change handsfree outside call voice volume: Adjust the volume while on an
on-hook (speakerphone) outside call.
•
To change headset intercom voice volume: (Models 8520 and 8560 endpoints
Only) Adjust the volume while using the headset and on an intercom call.
•
To change background music volume: Adjust the volume while listening to
music through the endpoint speaker.
NOTE:
The selected background music volume level is automatically saved.
end of the button to lower the vol-
) represents higher and lower volume levels. Press the
Inter-Tel Endpoint Features
and
) rep-
Advertisement
Chapters
Table of Contents
