Exiting And Re-Entering The Conference; Ending The Conference And Placing All Parties On Hold - Mitel Inter-Tel Axxess Administrator's Manual

Exiting and Re-Entering the Conference

To exit the conference and leave the other parties connected (any inside party) with an
Inter-Tel endpoint:
During the conference, press the
button flutters.
NOTE:
of the conference, the conference recalls your station. The recall rings at your station and the
CNF
Press the
Recall timer expires, it will recall the Attendant.
To return to the conference:
Lift the handset and/or press the
To exit the conference and leave the other parties connected (any inside party) with a Sin-
gle-Line Set:
During the conference, hookflash/recall and hang up.
NOTE:
station. When the recall rings at your station, lift the handset to answer the recall. If the recall is
not answered before the Recall timer expires, it will recall the Attendant.
To return to the conference:
Lift the handset and/or enter the Conference feature code (5).

Ending the Conference and Placing All Parties on Hold

To end the conference and put all parties on hold (any inside party) with an Inter-Tel
endpoint:
During the conference, press the
button flutters. The parties are still connected in a conference.
To place the parties on individual hold: Press the Hold button or enter the Individual Hold
feature code (336). You can then return to each party individually by pressing the associated
Call or
To end the conference and put all parties on hold (any inside party) with a Single-Line
Set:
During the conference, hookflash/recall and hang up. The parties are still connected in a con-
ference.
To place the parties on individual hold: Lift the handset and enter the Individual Hold fea-
ture code (336). You can then return to each party individually by entering the Individual Hold
feature code again.
Exiting and Re-Entering the Conference
®
Inter-Tel Axxess
If all remaining parties are outside parties and the Hold timer expires while you are out
button flashes at the medium rate. The display shows CONFERENCE RECALLING.
button to return to the conference. If the recall is not answered before the
CNF
If the Hold timer expires while you are out of the conference, the parties recall your
button.
IC
®
Administrator Guide — Issue 11.0, May 2008
button and hang up. The
CNF
button again.
CNF
button and hang up. The
CNF
System Features
button and a Call
CNF
button and a Call
CNF
Page 225