Installation And Configuration; Axxess And Eclipse Ip Softphone; Model 8602 Ip Softphone; Model 8690 - Mitel Inter-Tel Axxess Administrator's Manual

System Hardware
® ®
Inter-Tel Axxess Administrator Guide — Issue 11.0, May 2008
•
•

Installation and Configuration

To install and configure IP and SIP devices, you must know the required network settings and
be familiar with the associated hardware and software. For installation and configuration infor-
mation for all IP and SIP devices, refer to the IP Devices Installation Manual (part number
835.2195).

Axxess and Eclipse IP SoftPhone

The Axxess and Eclipse IP SoftPhones allow you to make and receive telephone calls on a PC.
The Axxess IP SoftPhone application uses the Executive Display endpoint graphical user inter-
face (GUI) and functions like an Executive Display endpoint installed directly on the system,
except for the IP limitations listed above. The Eclipse IP SoftPhone application uses the Pro-
fessional Display endpoint GUI and functions like a Professional Display endpoint installed
directly on the system, except for the IP limitations listed above. The Axxess or Eclipse IP
SoftPhone's audio is handled by the PC's microphone and speakers. The Axxess and Eclipse IP
SoftPhones terminate on IPRC (firmware v8.0 and earlier) in the system cabinet.
NOTE:
audio.

Model 8602 IP Softphone

The Model 8602 is a new IP softphone that is used with system versions 9.1 and later. The
Model 8602 is a softphone application that enables Voice over IP (VoIP) telephone calls from
laptops or desktop computers. The Model 8602 connects to the Inter-Tel
through an existing IP network. The Model 8602 operates like a Model 8662 endpoint and sup-
ports Inter-Tel Protocol (ITP) mode. Once a connection is established, Model 8602 users can
converse with another party (or parties) via a headset connected to their computer. The Model
8602 IP softphone requires software v9.1 or later and IPRC firmware v8.2.x or later.

Model 8690

The Model 8690 is an advanced IP endpoint that has an LCD touch screen that displays a tele-
phone-type interface. A stylus pen provides access to elements on the interface, which include
a dialpad, feature buttons, menu buttons and navigation buttons. The Model 8690 can operate
in Session Initiation Protocol (SIP) mode or Inter-Tel Protocol (ITP) mode (see
endpoint uses a customized version of Microsoft
and connectors for optional hardware and memory cards.
For more information about this unique IP endpoint, consult the appropriate documentation
listed below:
•
•
•
Page 102
They do not support Desktop Open Architecture Interface (OAI) applications.
While using peer-to-peer (P2P) audio, SIP and IP devices do not support the Agent
Help, Record-A-Call, and Station Monitor features.
The Axxess or Eclipse IP SoftPhone does not support v8.1 and later firmware or P2P
For supported features and end-user instructions: Model 8690 User Guide–Inter-Tel
Protocol Mode (part number 550.8116) or Model 8690 User Guide–Session Initiation
Protocol Mode (part number 550.8025)
For general administrator information: Model 8690 Administrator Guide (part num-
ber 550.8120)
For installation and maintenance information: IP Devices Installation Manual (part
number 835.2195)
®
®
Windows CE.NET v4.2, and includes ports
Installation and Configuration
telephone system
page 104). This