Install The Mounting Kit - Crestron TST-902 Product Manual

Install the Mounting Kit

To install the TST-902-DSW-WMKM postconstruction mounting kit:
NOTES:
Ensure the chosen mounting location allows for an air gap of at least 12 in. (305 mm)
l
in the wall cavity above and below the TST-902-DSW for heat dissipation.
The TST-902-DSW-WMKM has been optimized for mounting into drywall that is
l
5/8 in. (15 mm) thick, though it can also be mounted into drywall that is between
1/2 in. (13 mm) to 1 in. (25 mm) thick. Attempting to mount into thinner or thicker
drywall can cause installation issues.
Since the TST-902-DSW contains moving parts, Crestron recommends mounting it to
l
a wall stud for more support. While Crestron offers this postconstruction wall mount
kit, a preconstruction mounting option that is secured to a stud, such as the
TST-902-DSW-BB
Product Manual — Doc. 7750C
or TST-902-DSW-PMK, is recommended instead when feasible.
TST-902 • 67