Tst-902-Dsw Features - Crestron TST-902 Product Manual

TST-902-DSW Features

The TST-902-DSW
touch screen into the wall dock allows it to be used as a stationary touch screen while
simultaneously charging its internal battery.
When docked in the TST-902-DSW, the touch screen sits nearly flush with the outer bezel,
affording a clean appearance while preventing unauthorized removal. By entering a pass code or
pressing a button on the touch screen, the mechanism gently tilts the touch screen outward,
allowing it to be released for wireless use. A hardware key is included to release the touch screen
in the event of a power outage.
The TST-902-DSW is designed for flush-mount installation in a flat, vertical wall structure.
Installation of the wall dock requires additional hardware (not included):
The TST-902-DSW-BB
l
and masonry construction.
The TST-902-DSW-PMK, TST-902-DSW-WMKM, and
l
kits are available for preconstruction and postconstruction applications that do not
require a back box.
Note:
1. The TST-902-DSW docking mechanism works as intended when mounted in a standard vertical orientation (such as
within a wall). The maximum allowable tilt is 16° back. The mechanism will not eject properly at an angle greater than
this.
Product Manual — Doc. 7750C
is an optional wall dock for the
and TST-902-DSW-BBI back boxes are available for both framed
TST-902 wireless touch screen. Placing the
TST-902-DSW-WMKT
1
mounting
TST-902 • 9