Tsw-570, Tsw-770, And Tsw-1070 Installation; Install The Mounting Bracket - Crestron TSW-70 Series Product Manual

Wall mount touch screens
Hide thumbs Also See for TSW-70 Series:
Table of Contents

Advertisement

TSW-570, TSW-770, and TSW-1070
Installation
Use the following procedures to install the TSW-570, TSW-770, and TSW-1070 touch screens.

Install the Mounting Bracket

The TSW-570 uses a different mounting bracket than the TSW-770 or TSW-1070. The
procedures for installing each mounting bracket are described in the following sections.
Install the TSW-570 Mounting Bracket
The TSW-570 can be mounted into drywall and other surfaces, or it can be mounted onto a wall
stud.
NOTE:
Additional mounting options are possible using the TSW-UMB-70 universal mounting
bracket, TSW-UMB-70-PMK preconstruction mounting kit, TSW-UMB-70-BBI wall mount back
box, or TSW-570/770-RMK-1 rack mount kit. For more information, refer to the product pages
at www.crestron.com.
Preconstruction Installations
To install the TSW-570 mounting bracket in preconstruction applications, use standard drywall
nails or screws (not included) to attach the TSW-UMB-70-PMK mounting bracket to a wall stud.
NOTE: Allow an air gap of at least 12 in. (305 mm) in the wall cavity above and below the touch
screen for heat dissipation.
Postconstruction Installations
To install the TSW-570 mounting bracket in postconstruction applications:
1. Use the TSW-UMB-70-PMK mounting bracket as a cutout template by turning the bracket
to face the wall, ensuring it is level, and tacking it to the wall temporarily with finishing
nails (not included) through the smaller holes around the cutout opening.
96 • TSW-70 Series
Product Manual — Doc. 8550E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents