Table of Contents
Advertisement
TST-902 Installation
Use the following procedures to install the TST-902.
In the Box
Qty.
Description
1
TST-902, 8.7 in. Wireless Touch Screen
Additional Items
1
Battery Pack, Rechargeable, TST-902-BTP (4513771)
1
Docking Station, TST-902-DS (4517187)
1
Power Cord, 6 ft, 7 in. (2.0 m) (2001134)
1
Power Supply, 24VDC @ 0.75A, 100–240VAC (2048337)
1
Tool, T-Pin (2020478)
Install the Battery Pack
The TST-902 ships with a rechargeable battery pack (TST-902-BTP) that must be installed into
the touch screen prior to use.
CAUTION: Note the following to avoid damage to the TST-902 or its battery pack:
The TST-902 is sensitive to electrostatic discharge (ESD). To avoid damage to the
l
device, install the battery pack while wearing a grounding strap or while working
within a grounded workstation.
To prevent damage to the multipin connector and wiring, handle the battery pack with
l
care during installation.
The battery pack is enclosed in a black plastic overwrap that is designed to stay on the
l
battery pack permanently. It must not be removed.
To install the battery pack into the TST-902:
1. Insert the provided t-pin tool into one of the two tab release holes on the rear of the
TST-902, and then slide the bottom cover downward to release the tab on that side.
2. Repeat step 1 for the other tab release hole.
36 • TST-902
Product Manual — Doc. 7750C
Advertisement
Table of Contents
