Set Up A Wi-Fi Network Connection - Crestron TST-902 Product Manual

the ER gateway as described in its documentation.

Set Up a Wi-Fi Network Connection

The TST-902 supports an optional connection to a Wi-Fi network. Advanced wireless capabilities
such as streaming video, voice recognition, web browsing, and dynamic graphics are supported
only by using both ER and Wi-Fi communications together (dual-mode).
NOTE: If a Wi-Fi connection is not configured, the USB port on the TST-902 must be used to
load user projects, perform certain configuration tasks, and update firmware. The USB port
is located under the battery cover and to the left of the battery.
To connect the TST-902 to a Wi-Fi network:
1. Access the TST-902 setup screens as described in
The TST-902 Setup screen is displayed.
Product Manual — Doc. 7750C
Access the Setup Screens on page 83.
TST-902 • 85