Table of Contents
Advertisement
RF Setup
Tap RF Setup on the TST-902 Setup screen to display the RF Setup screen.
The RF Setup screen provides controls that can be used to acquire the TST-902 to a Crestron
Extended Range (ER) wireless gateway (not included). Once the TST-902 has been acquired to a
gateway, the gateway UID, name, and RF signal strength are displayed.
NOTE: For instructions on acquiring the TST-902 to a Crestron ER wireless gateway, refer to
Set Up an Extended Range RF Connection on page
The following buttons and controls are provided for configuring RF settings:
Tap Acquire to acquire the touch screen to a Crestron ER wireless gateway that has been
l
placed in Acquire mode. Refer to
more information.
Tap the up and down arrow buttons under RF ID to set the RF ID for the gateway
l
connection.
Tap the up and down arrow buttons under RF Channel to set the RF channel used for the
l
gateway connection.
Tap HIGH or LOW under RF Power to use high or low power for the touch screen RF signal.
l
Tap On or Off under RF Roaming to turn RF roaming on or off.
l
NOTE: For installations with multiple gateways, the TST-902 can be configured to use
RF roaming. For instructions, refer to the
Product Manual — Doc. 7750C
83.
Set Up an Extended Range RF Connection on page 83
Touch Screen RF Roaming Quick
for
Start.
TST-902 • 91
Advertisement
Table of Contents
