Yamaha MM600D Service Manual page 42

A
B
SEJ2660
C
STEERING SYSTEM/LUBRICATION
3. Adjust:
Adjustment steps:
•
•
•
SEJ2650
CAUTION:
After tightening the inside and outside ball joint
locknut 1, make sure the tie rod 2 can be rotated
freely through the ball joint travel. If not, loosen
the locknut 1 and re-position the ball joint so
that the tie rod 2 can be rotated freely. Tighten
the locknut to specification.
Å
ı
Ç
SEJ2665
2-29
•
Ski toe-out
Loosen the locknuts (tie-rod) 1.
Turn the tie rod 2 in or out until the specified
toe-out is obtained.
Tighten the locknuts (tie-rod) 1.
Locknut (rod end) 1:
25 Nm (2.5 m • kg, 18 ft • lb)
®
LOCTITE
Left side
Right side
Inside
INSP
ADJ