Yamaha MM600D Service Manual page 20

1
1
COOLING SYSTEM
4. Remove:
•
Coolant filler cap 1
WARNING
Do not remove the coolant filler cap 1 when the
engine is hot. Pressurized scalding hot fluid and
steam may be blown out, which could cause
serious injury. When the engine has cooled, place
a thick rag or a towel over the coolant filler cap.
SEJ2110
Slowly turn the cap counterclockwise until it
stop. This allows any residual pressure to escape.
When the hissing sound has stopped, press down
on the cap while turning it counterclockwise to
remove it.
5. Place an open container under the coolant
drain bolt 1.
6. Remove:
•
Coolant drain bolt
•
Gasket (coolant drain bolt)
7. Drain the coolant.
NOTE:
Lift up the tail of the machine to drain the coolant.
SEJ2120
8. Remove:
•
Right side cover 1
SEJ2130
9. Disconnect:
•
Coolant hose 3 1
10. Drain the coolant.
NOTE:
Lift up the tail of the machine to drain the coolant
completely.
SEJ2140
2-7
INSP
ADJ