Yamaha MM600D Service Manual page 208

L To the carburetor
M Pulser hose
N Oil delivery hose
O To the oil pump
P When fastening the wire
harness with the attached
clamp, bend the clamp inward
to fasten.
Q Do not fasten.
R Fasten the wire harness at the
white tape mark, with a clamp.
S Oil hose
T Coolant reservoir hose
U To filler cap body
V Voltage/regulator
W Rectifier/regulator
X Fasten the wire harness with a
plastic band.
Y Pass the brake hose through
the hose guide.
Z Ensure this is not kink.
[ Fasten the wire harness, fuel
tank breather hose and oil tank
breather hose with a plastic
band.
\ Install the starter lever to the
position as illustrated.
CABLE ROUTING
9-30
SPEC