CYLINDER HEAD AND CYLINDER
SEJ5290
a
SEJ5300
SEJ5310
a
b
SEJ5320
4. Check:
•
Piston ring position
CAUTION:
•
Make sure that the ring ends are properly fitted
around the ring locating pins in the piston
grooves.
•
Be sure to check that the manufacturer's marks
or numbers stamped on the rings face upward.
5. Install:
•
Gasket (cylinder)
NOTE:
Install the gasket (cylinder) with its projection a
facing the CDI magneto side.
CAUTION:
Always use new gasket.
6. Install:
•
Cylinder
NOTE:
Install the cylinder with one hand while com-
pressing the piston rings with the other hand.
7. Install:
•
Gaskets (cylinder head)
NOTE:
Install with the mark a facing upwards and the
projection b on the intake side.
8. Tighten:
•
Nuts (cylinder head)
5-13
ENG