Yamaha MM600D Service Manual page 200

K Under 50 mm (1.97 in)
L Fasten the speedometer cable
and wire harness with a plastic
clamp. Install the clamp as
close to the drive V-belt guard
bracket, as possible (rearward)
M Fasten the oil pump cable and
starter cable to the claws on
the ignition coil and intake
silencer with the plastic
clamps.
N 2 ~ 4 Notches
O Starter cable
P Wire harness
Q Ignition coil #3
CABLE ROUTING
9-22
SPEC