Yamaha MM600D Service Manual page 18

13. Install:
•
Gasket (bleed bolt)
•
Bleed bolt
14. Install:
•
Carburetors
Refer to "CARBURETORS" in CHAPTER 7.
Cable adjustment
NOTE:
Before adjusting the oil pump cable, the throttle
cable distance should be adjusted.
SEJ2060
Adjustment steps:
•
Slide back the adjuster cover.
•
Loosen the locknut 1.
•
Turn the adjuster 2 in or out until the specified
distance a is obtained.
Distance a:
SEJ2070
Turning in → Distance a is increased.
Turning out → Distance a is decreased.
•
Tighten the locknut and push in the adjuster
cover.
2-5
INSP
OIL PUMP
ADJ
MM600:
23 ± 1 mm (0.906 ± 0.04 in)
MM700:
22 ± 1 mm (0.866 ± 0.04 in)