OIL PUMP, CRANKCASE AND CRANKSHAFT
SEJ5410
SEJ5420
SEJ5430
SEJ5440
INSTALLATION
1. Install:
•
Stopper ring 1
(onto the lower crankcase bearing 2 (pri-
mary sheave side) as shown)
3 Knock pin
2. Install:
•
Crankshaft assembly
(onto the upper crankcase Å)
NOTE:
Turn the bearings and labyrinth seal to set the
knock pins 1 on the bearings and labyrinth seal
into the pin holes 2 in the upper crankcase Å.
3
Bearing (CDI magneto side)
NOTE:
Turn bearing 3 to set the knock pin 4 on the
upper crankcase Å into the pin hole 5 in the
bearing.
CAUTION:
The oil seal lip must fit into the crankcase groove.
5-18
ENG