Receiving Faxes With The Receiver On The Hook; Receiving Documents Stored In The Sender's Machine (Polling Rx) - Konica Minolta PagePro 1390 MF User Manual

Receiving Faxes With the Receiver On the
Hook
A fax can be received after the call is checked without a telephone con-
nected.
1
When the telephone rings, press the [On Hook] key.
To receive a fax with voice guidance (for example, with a fax informa-
tion service), press the [On Hook] key, and then type in the sender's
fax number.
2
Press the [Start] key when
instructed by the sender. A
screen appears, allowing you to
select whether to send or
receive a fax.
3
Press the [2] key. The fax reception begins.
Receiving Documents Stored in the
Sender's Machine (Polling RX)
With Polling Rx, a document loaded in the sender's fax machine or the docu-
ment reserved for polling transmission is sent when a request is sent. Docu-
ments available through a fax information service can be received.
With Polling Rx, the recipient incurs the cost of the call.
1
Press the [Menu] key, the [6] key, and then the [Select] key.
2
Press the [+] key twice. Check
that the Polling RX screen
appears, and then press the
[Select] key.
3
Type in the fax number of the sender.
The sender's fax number can
be specified in any of the fol-
lowing ways.
–
–
–
For details on specifying the recipient, refer to "Specifying a Recipient"
on page 25.

Receiving Faxes With the Receiver On the Hook

Direct dialing
Using the one-touch dial key
Using the Speed Dial function
35