5
Correct the fax number of the
recipient.
6
Press the [Select] key to register
the corrections and return to the Fax mode screen.
Press the [Stop/Reset] key to return to the Fax mode screen without
registering the entered information.
Speed Dial
Programming a Speed Dial
Register frequently used fax numbers with speed dial numbers (maximum
100). Press a number key when sending a fax to recall the fax number.
1
Press the [Menu] key, the [5] key, and then the [Select] key.
2
Press the [+] key. Check that the
Speed Dial screen appears, and
then press the [Select] key.
3
Type in the 2-digit speed dial
number to be programmed.
Speed dial number 00 through 99 can be used.
4
Type in the name of the fax
recipient, and then press the
[Select] key.
The fax recipient's name can
contain a maximum of 20 characters.
To cancel the speed dial programming, press the [Cancel] key. The
Speed Dial screen appears again.
To correct the entered information, press the [+] or [–] key until the cur-
sor is positioned at the information to be corrected. Then, press the
[–] key to delete a character.
A speed dial can be programmed without specifying a fax recipient's
name. If this speed dial number is entered when sending a fax, the fax
number is displayed.
42
Speed Dial