To correct the entered information, press the [+] or [–] key until the cur-
sor is positioned at the information to be corrected. Then, use the key-
pad to type in the correct information.
5
Type in the fax number of the recipient.
The recipient can be specified in any of the following ways.
–
Direct dialing
–
Using the one-touch dial key
–
Using the Speed Dial function
–
Using the Group Dial function
For details on specifying the recipient, refer to "Specifying a Recipient"
on page 25.
6
Press the [Start] key. The document is scanned and the fax is sent at the
specified time.
A maximum of five documents can be set for timer transmission. Jobs
queued for timer transmission can be checked by printing a Memory
Job List.
Jobs queued for timer transmission can be deleted by specifying their
job number in the Mem. Clear screen.
30
Sending a Fax at a Specified Time