Deleting A Recipient From A Group Dial - Konica Minolta PagePro 1390 MF User Manual

In order to program a group dial, the fax recipient's number must be
registered as a one-touch dial key or a speed dial. For details on pro-
gramming one-touch dial keys, refer to "One-Touch Dial" on page 40.
For details on programming speed dial numbers, refer to "Speed Dial"
on page 42.
To cancel the group dial programming, press the [Cancel] key. The
previous screen appears again. Press the [Stop/Reset] key to return to
the Fax mode screen.
6
Press the [Select] key to register the entered information. To register
another recipient, repeat steps 5 and 6.
7
To finish the registration, press the [Cancel] or [Stop/Reset] key to return
to the Fax mode screen.
To check the group dial information, press the one-touch dial key in
the Fax mode screen where the group dial is registered. Press the [+]
and [–] keys to check the information.
In addition, the fax phone book can be printed to be checked. For
details on the fax phone book, refer to "Printing the Contents of the
Phone Book" on page 64.
The most recently registered group dial number is added at the end.
The order of the group dials cannot be changed.
The fax is sent to the recipients in the order that they were selected for
the group dial.
A group dial cannot be registered with a different group dial.

Deleting a Recipient From a Group Dial

One or more recipients can be deleted from an existing group dial.
1
Press the [Menu] key, the [5] key, and then the [Select] key.
2
Press the [+] key twice. Check
that the Group Dial screen
appears, and then press the
[Select] key.
3
Press the one-touch dial key for the group dial where a recipient is to be
deleted.
4
Press the [+] key. Check that "Delete" appears in the screen, and then
press the [Select] key.
5
Use the [+] and [–] keys to select the recipient to be deleted.
Group Dial 45