Loading Original Documents; Loading The Original Document Into The Adf Input Tray - Konica Minolta PagePro 1390 MF User Manual

If the fax could not be sent (for example, because the line was
busy), the Auto Redial function will try sending the transmission
again. For details on the Auto Redial function, refer to "About Fax
Setup" on page 13.
If the fax could not be sent with the Auto Redial function, a Trans-
mit Report is printed. For details, refer to "Printing Reports and
Lists" on page 55.
Since a document with multiple pages is saved in the memory
while it is being sent, the document is scanned at high speed. A
maximum of 50 pages can be stored in the memory. (If the Resolu-
tion setting "Photo" was selected, 50 pages may not be stored in
the memory.) The fax will be sent when the memory becomes full.
In addition, since no more than 50 pages can be sent in a single
transmission, any pages that exceed that number are not sent.
After the transmission is completed, another transmission opera-
tion can be performed.

Loading Original Documents

Loading the Original Document Into the ADF Input Tray

If the ADF is used, original documents containing multiple pages can be auto-
matically scanned.
Do not load original documents that are bound together, for example,
with paper clips or staples.
Do not load more than 50 sheets; otherwise a original document mis-
feed or damage to the document or machine may occur.
If the original document is not loaded correctly, it may not be fed in
straight, or an original document misfeed or damage to the document
may occur.
Do not open the ADF cover while documents loaded into the ADF are
being scanned.
1
Make sure that there is no document on the flatbed glass.
Loading Original Documents 21