Konica Minolta PagePro 1390 MF User Manual page 22

Redial Int.
Footer
DialTone Det
Fax Main.
16
Settings
10s / 30s / 1min / 2min / 3min
Select the length of time in seconds (s) or minutes (min)
during which redials are attempted.
Settings
Off / On
Select whether or not the sender's information is printed
on received faxes.
Settings
Off / On
Select whether or not to detect a dial tone. With this
feature, the line is checked for a dial tone before dialing
begins. If On is selected, the number is not dialed if no
dial tone can be detected.
Settings
Connect
Time
Select the amount of time until the
connection times out.
Tx Level Settings
Select the transmission level of the fax
transmission signal.
Settings
ECM
Select whether or not the automatic error
correction mode (ECM) is used to
automatically send the fax again if an error
occurs during the transmission of the
document (for example, due to a
disturbance in the line).
Tx Speed Settings
Select the modem speed for sending faxes.
Rx Speed Settings
Select the modem speed for receiving
faxes.
60 secs / 70 secs / 80
secs / 90 secs
0dbm / -1dbm / -2dbm /
/ / -10dbm / / / -15dbm
(Default: Depends on the sales
region)
Off / On
33.6 / 31.2 / 28.8 /
26.4 / 24.0 / 21.6 /
19.2 / 16.8 / 14.4 /
12.0 / 9.6 / 7.2 / 4.8
/ 2.4(Kbps)
33.6 / 31.2 / 28.8 /
26.4 / 24.0 / 21.6 /
19.2 / 16.8 / 14.4 /
9.6 / 4.8 / 2.4(Kbps)
Initial Settings