Konica Minolta PagePro 1390 MF User Manual page 75

Bad fax number
Bad fax job ID
Fax job:xxx busy
Line is busy
Number busy
No connection
Com Err:xxxxxx
Dialing Failed
Redialing failed
Error Messages on the Display
A space was entered in
the fax number.
The number of a job that
does not exist in the mem-
ory was entered.
Job number xxx is cur-
rently being sent.
The recipient's line is busy. Wait a while, and then try
No dial tone was detected. Check the condition of the
A transmission error has
occurred.
The recipient's machine
is set for manual recep-
tion, but the reception
operation was not per-
formed.
The recipient may not
have a fax machine.
Redialing was attempted
the number of times speci-
fied for the Auto Redial
function, but the fax could
not be sent.
This message appears if a
space was entered in the
fax number during a polling
reception or broadcast
transmission. Enter the fax
number without a space.
Check the job numbers on
the memory job list, and
then try performing the
operation again.
Press the [Stop/Reset] key
to stop the transmission,
and then delete the job.
sending the fax again.
line.
Check the error code.
Check with the recipient,
and then try performing the
operation again.
Wait a while, and then try
sending the fax again, or
check with the recipient for
the status of their fax
machine.
69