Adding The Sender's Information When Printing Faxes - Konica Minolta PagePro 1390 MF User Manual

Adding the Sender's Information When
Printing Faxes
If transmission source information is set in Fax Setup to be printed, informa-
tion such as the sender's fax number, reception date/time, job number and
page number can be printed 3 mm (0.118") from the bottom edge of the fax
that is received and printed.
Item
1 Reception date/
time
2 Sender's fax
number
3 Job number
4 Page number
In order to print the footer, the Footer parameter on the Fax Setup
menu must be set "On". For details, refer to "About Fax Setup" on
page 13.

Adding the Sender's Information When Printing Faxes

1 2
Description
Shows the date/time that the fax was received.
The time is indicated in the 24-hour format.
Shows the sender's fax number.
Shows the job number used to manage the
received fax.
Shows the page number.
Shown as page number/total number of pages.
However, the total number of pages is not printed
while the received fax is being printed. The total
number of printed pages is printed after the recep-
tion is completed.
If the received page was divided into two pages,
this item is printed as shown below.
Example: 01.01/05 appears in the footer of the first
page when the first of a total of five pages does not
fit within the paper, even when reduced, and is
divided between two pages.
3
If an error occurred while the fax was being
received, the total number of pages is not
indicated.
4
37