Sending A Fax Manually; Sending A Fax Manually After Using The Telephone - Konica Minolta MC1690MF User Manual

4
Press the + or , key to select the desired transmission method, and then
press the Select key.
5
Specify the fax number of the recipient.
Refer to "Specifying a Recipient" on page 3-7.
To send a broadcast transmission to multiple destinations, refer to
"Sending a Fax to Multiple Recipients (Broadcast Transmission)" on
page 3-11.
6
Press the Start key to begin scanning and sending the fax.
To stop the transmission, press the Stop/Reset key. A message
appears, requesting confirmation to cancel the setting. Select YES ,
and then press the Select key.
The transmission method returns to the default setting after the docu-
ment is scanned with a normal transmission or after transmission with
a manual transmission. It is useful if the most frequently used trans-
mission method is selected as the default. For details, refer to "FAX
TX OPERATION" on page 2-24.

Sending a Fax Manually

Sending a Fax Manually After Using the Telephone

If the machine is connected to a telephone and the same line is used for both
phoning and faxing, the document can simply be sent after talking with the
recipient over the phone.
This is useful, for example, if you want to tell the recipient that you are send-
ing a fax.
Manual transmission cannot be used together with duplex (dou-
ble-sided) document transmission.
1
Load the document into the ADF.
When sending a fax manually, load the document into the ADF. An
error will occur if the document is placed on the original glass.
For details on loading the document into the ADF, refer to "Sending a
Fax Using the ADF" on page 3-2.
2
If desired, adjust the image quality.
The document image quality can be adjusted. For details, refer to
"Adjusting the Image Quality" on page 3-6.
Sending a Fax Manually 3-17