Adjusting the Image Quality
The image quality of a document can be adjusted before it is sent as a fax.
Adjusting the Resolution
1
Press the + or , key to select the current fax image quality, and then
press the Select key.
2
Check that QUALITY (ORIGINAL) is selected, and then press the
Select key.
3
Press the + or , key to select the fax resolution, and then press the
Select key.
The resolution is adjusted.
Select the resolution appropriate for the document.
- STD/TEXT : Select this setting for documents containing handwriting
or for computer printouts.
- FINE/TEXT : Select this setting for documents containing small print.
- S-FINE/TEXT : Select this setting for documents containing small
print, such as newspapers, and documents containing detailed illustra-
tions.
- STD/PHOTO : Select this setting for photo documents containing reg-
ular photos.
- FINE/PHOTO : Select this setting for photo documents containing fine
images.
- S-FINE/PHOTO : Select this setting for photo documents containing
finer images.
The resolution returns to the default setting after the document is
scanned with a normal transmission or after transmission after manual
transmission. The default setting can be changed. This is useful for
specifying a frequently used resolution setting as the default. For
details, refer to "FAX TX OPERATION" on page 2-24.
3-6
STD/TEXT , FINE/TEXT , S-FINE/TEXT , STD/PHOTO , FINE/
PHOTO or S-FINE/PHOTO may appear, depending on the setting
selected for FAX TX OPERATION in the UTILITY menu.
Adjusting the Image Quality