Directly Entering A Fax Number; Using The Favorite List - Konica Minolta MC1690MF User Manual

Directly Entering a Fax Number

1
Use the numeric keypad to type in the fax number for the recipient.
The keys that can be used to enter the fax number are: the number
keys (0 through 9),
If the Redial/Pause key is pressed while entering the fax number, a
2.5-second pause is added. A pause appears as
window.
If the machine is connected to a PBX line and the prefix number (out-
side line access number) has been specified in the
TING
To erase the entered number, hold down the Back key for about one
second, or press the Stop/Reset key.
2
Press the Select key.
3
Press the + or , key to select FINISH, and then press the Select key.
The destination is specified.
To erase the selected destinations, press the Stop/Reset key.

Using the Favorite List

If frequently specified speed dial destinations and group dial destinations are
registered in the favorite list, press the Addressbook key, and then press the
+ or , key to quickly select the desired destination.
The destination must have been previously registered on the favorite
list. For details, refer to "Registering Destinations in the Favorite List"
on page 6-2.
1
Press the Addressbook key.
The Addressbook key can be used if the main screen or Can Use
AddressBook is displayed.
2
Press the + or , key to select the desired destination, and then press the
Select key.
If a destination was incorrectly selected, press the Back key, press the
Addressbook key, and then select the correct destination.
3
When EDIT = Select appears, press the Select key again.
4
Press the + or , key to select
The destination is specified.
3-8
and #.
, enter "#" to dial the outside line access number automatically.
, and then press the Select key.
FINISH
Specifying a Recipient
in the message
P
COMM. SET-