System Readiness - Emerson Rosemount 2051 Reference Manual

Configuration
September 2020
WARNING
Replacement equipment or spare parts not approved by Emerson for use as spare
parts could reduce the pressure retaining capabilities of the transmitter and may
render the instrument dangerous.
Use only bolts supplied or sold by Emerson as spare parts.
Improper assembly of manifolds
Improper assembly of manifolds to traditional flange can damage the SuperModule
Platform.
For safe assembly of manifold to traditional flange, bolts must break black plane of flange
web (i.e., bolt hole) but must not contact module housing.
Physical access
Unauthorized personnel may potentially cause significant damage to and/or
misconfiguration of end users' equipment. This could be intentional or unintentional and
needs to be protected against.
Physical security is an important part of any security program and fundamental to
protecting your system. Restrict physical access by unauthorized personnel to protect end
users' assets. This is true for all systems used within the facility.
2.3

System readiness

• If using HART
capability of such systems prior to commissioning and installation. Not all systems are
capable of communicating with HART revision 7 devices.
• For instructions on how to change the HART revision of your transmitter, see
HART
2.3.1 Confirm correct Device Driver
Procedure
1. Verify the latest Device Driver (DD/DTM
2. Reference
3. In the browse by member dropdown menu, select Rosemount business unit of
4. Select desired Product.
12
®
-based control or asset management systems, confirm the HART
revision.
proper communications.
Emerson.com
Emerson.
a) Within Table 2-1, use the HART Universal Revision and Device Revision
numbers to find the correct Device Driver
™
) is loaded on your systems to ensure
or FieldCommGroup.org
Reference Manual
00809-0100-4107
Switching
for the latest DD.
Rosemount 2051 Pressure Transmitter
™